Install Android 6.0.1 Marshmallow on Galaxy note 7 SM-N930W8
The Galaxy note 7, the latest addition to Samsung’s note lineup, is already out for a while now. The phone was released with Android Marshmallow based Grace UX as well as now the manufacturer has started pushing an incremental update for the device.
Along with other parts of the globe, the new update with develop version N930W8VLU1APH1 is now being rolled by the Canadian carriers like Bell Mobile, Virgin Mobile, Rogers, Telus, Fido Mobile, Wind Mobile, Videotron, SaskTel, Koodo, EastLink, etc.
If you own the Canadian Galaxy note 7 (SM-N930W8), as well as don’t understand exactly how to update Samsung gadgets or bring back them to stock manually, this tutorial is just for you.
Disclaimer
The firmware installation explained below is typical for all Samsung Galaxy devices, however the firmwares are strictly meant to be installed on specific provider variations of the Galaxy note 7 SM-N930W8 only.
Before you jump to the installation steps below, make sure to checked out the entire tutorial very first as well as make the necessary preparations beforehand. If you comply with the procedure carefully, there is barely any type of risk. However, if you are careless, or miss or avoid any type of step, you’ll certainly end up in a mess. comply with the tutorial at you own danger as well as don’t hesitate to remove your doubts if you have any.
Download Marshmallow Firmware for note 7 SM-N930W8
Firmware details:
OS Version: Marshmallow (Android 6.0.1)
Country/Region: Canada
Release Date: 18.08.2016
PDA: N930W8VLU1APH1
CSC: N930W8OYA1APH1
Phone: N930W8VLU1APH1
As you can see above, the released firmware’s develop version is N930W8VLU1APH1 as well as you can download it for your Canadian Galaxy note 7 below.
Bell Mobile Galaxy note 7 SM-N930W8: link | Mirror
Virgin Mobile Galaxy note 7 SM-N930W8: Link | Mirror
Rogers Galaxy note 7 SM-N930W8: Link | Mirror
SaskTel Galaxy note 7 SM-N930W8: Link | Mirror
Telus Galaxy note 7 SM-N930W8: Link | Mirror
Koodo Mobile Galaxy note 7 SM-N930W8: Link | Mirror
Fido Mobile Galaxy note 7 SM-N930W8: Link | Mirror
EastLink Galaxy note 7 SM-N930W8: Link | Mirror
Globalive Wind Mobile Galaxy note 7 SM-N930W8: Link | Mirror
Videotron Galaxy note 7 SM-N930W8: Link | Mirror
Things You Need
Canadian Galaxy note 7 SM-N930W8
The stock USB cable that came with your phone.
A Windows computer.
If you own a Mac instead, you can utilize Heimdall or the Java version of Odin from here.
Getting Prepared
Download the appropriate firmware for the Canadian provider your Galaxy S7 is top quality to from above as well as extract the zip.
Download Odin 3.10.7 from right here as well as extract the zip.
Make sure you have the latest Samsung Kies or USB drivers installed on your PC. In situation you have Kies in your PC, make sure it’s closed while utilizing Odin.
Enable USB Debugging discovered under Settings> designers choices in your Samsung Galaxy note 7. See the detailed tutorial here.
Installing the stock firmware does not wipe any type of data or installed apps, however you should still backup them as a precaution.
Also, your phone must have at least 60% battery juice left on it before you begin.
Install Marshmallow on Canadian Galaxy note 7 SM-N930W8
Having taken care of the preparatory steps explained above as well as downloaded the firmware, you’re all set to set up it on your device. just comply with the simple steps provided below.
Open the Odin folder as well as launch Odin 3.10.7.exe as administrator.
Now turn off your Galaxy S7 as well as boot it into the download mode. To do so, hold the volume Down + house buttons together as well as then press the Power key. keep the 3 secrets pressed for 2-3 seconds as well as then you will see a warning screen with a yellow exclamation mark. now press the volume Up key to go into the download Mode.
Connect your phone to the PC utilizing the USB cable.
When your gadget is detected by the computer, the ID:COM port in Odin will turn blue as well as you’ll see “Added!” in Odin’s message box. In situation Odin does not spot your phone, try reinstalling the USB drivers, rebooting the computer as well as trying a different cable.
Click the choices tab in Odin as well as make sure that only auto Reboot as well as F. Reset Time choices are selected.
Now click the AP button in Odin as well as choose the firmware data with .tar.md5 extension.
Take a calm breath as well as click the begin button to trigger the installation.
Now wait patiently as it may take 4-6 minutes for the installation process to complete.
When the firmware is installed on your Galaxy note 7, Odin will greet you with PASS! message to suggest a successful installation.
It’s the time when your phone will reboot automatically. You requirement to be patient once again since it sometimes takes a while up until your gadget reboots.
Done! In situation you get a FAIL! messagenull